 Realization of gas&oil wells in development and exploration fields (Hassi Massaoud, Hassi R’mel).  Realization of Directional wells (Short and Medium Radius Wells).  Realization of Vertical Wells to 18000 ft (TVD).  Realization of Single Completion (cased hole, Open Hole, Horizontal)  Drilling with different Bits: PDC, Rock Bit, Impregnated bit: 36”, 26”, 16’’, 12’’1/4, 8”1/2, 6”, 5”7/8 and 3”3/4  Control and run different size of casing: 30”, 18”5/8, 13”3/8, 9”5/8, 7”, 4”1/2.  Assist the liner operator for run 7” and 4”1/2 Hydraulic and Mechanical Liner.  Electric wireline operations: Open and cased hole logging, casing gun, Permanent packers.  Place orders for materials, equipment and service company personnel with allowance of sufficient lead time.  Ensure that the equipment arriving at the rig site for use on the well construction program are certified, measured, and verified prior to running in hole, including casing and liner strings.  Realization of casing cement jobs, plugs and different forms of squeeze.  Conduct safety and well control drills.  Write Detailed Work Instructions, for the Rig Drilling Contractor and the Drilling Service Providers on the Rig.  Assist and coordinate with DST operators (open hole DST, DST with 7” liner perforated).  Witness all pressure tests (Well head, X-mass tree, BOP, Casing, LOT, FIT, SIT, etc.)  Record keeping such as casing, Drill pipe tally, BOP test chart, Cement job, …  Supervise location clean-up after the well is completed or abandoned.  Witness Rig move: Safety guidelines, transportation and setting are followed.  Training of the assistant Drilling supervisor.

IADC WellSharp, IADC Rig Pass, NEBOSH IGC, IOSH MS, IADC H2S, OPITO BOSIET