(Unconventional resources drilling dept.)  Worked on many land rigs to drill unconventional gas HPHT wells in ARAMCO fields. Key Achievements • Successfully drilled lateral wells with deep KOP & long lateral section (10K ft – 15K ft) thru shale & carbonates formations. • Successfully run casing thru short radius curve section & long lateral sections. • Drilling on multi-slot pads with anti-collision control. • Skidding rig move over multi cellar Pad. • Run open hole completion (long string, lower completion, cemented completion- …. Etc.) • Performance drilling ERD wells with very fast ROP & very efficient drilling practices for hole cleaning in JAFURAH field. • High knowledge of safe work procedures & measures to avoid non-expected incidents. RASHPETCO JV SHELL Egypt. 2016 – 2022  Worked in Rashpetco JV Shell – Egypt in West Delta Deep Marine (250 – 1500m water depth) in Mediterranean Sea in vertical, deviated, and horizontal Subsea wells using Drill Ships (Noble-Globetrotter I, Ensco-DS7 and Transocean-Discoverer India).  The system allowed me to work as: Drilling Supervisor and Senior Drilling Operations & Wells Engineer. Drilling Supervisor • Ensure safe execution and delivery of well construction and intervention activity in line with HSE, company policy and procedures. • Execute program and manage operations reporting to senior drilling supervisor. • Familiar with new technologies like Conductor jetting and Hole enlargement. • Check all on site Equipment (e.g. casing handling equipment, drilling BHA) Well Materials (e.g. casings, liner hangers, wellheads, packers), and Well Consumables (e.g. bits, mud additives, cement additives). • Review operations with service partners ensuring required tools and personal. • Prepare daily drilling report, forecast and daily operations instructions. • Well Control supervision and operations as required. • Supervise operations on Work over and Completion wells both open and cased hole gravel pack, upper completion and running horizontal X-mass tree. • Verify drilling fluids are mixed as per the mud program and required solids control equipment is operated at each phase of the well. • Familiar with water based, oil-based muds and completion fluids.

IWCF Drilling Supervisor level 4., Well Sharp , H2S IADC , BOSIET • Advanced Drilling Engineering. • HPHT well engineering • Well Design • Drilling Problems • Directional, Horizontal and Multilateral well drilling • IOSH • OSHAR