• Monitored and analyzed real-time drilling parameters including Weight on Bit, Torque, Rate of Penetration, Mud Flow and Bottom Hole Pressure leveraging Measurement While Drilling & Logging While Drilling data to detect anomalies such as kick detection, lost circulation, stuck pipe, string wash out etc.. • Interpreted lithology and top/bottom of the formations in real time correlating drilling parameters, cuttings analysis, gas chromatography with M/LWD logs like Gamma, Sonic, Resistivity etc.. • Developed Torque & Drag models to predict drilling loads, reduce risks of stuck pipe and excessive torque. Also conducted Swab & Surge pressure stimulations using hydraulic models to evaluate safe tripping speeds, minimize formation damage, and ensure wellbore stability. • Created 14+ logs/reports daily including Mud log, Gas log, Pressure log, Hydrocarbon log, Hydraulics report, Drilling and Gas data in LAS, ASCII, Excel file format, and all final well reports in an accurate and technical manner according to client requirements. • Operated and maintained equipments at the site, calibrated the sensors ensuring seamless data acquisition, transmission and quality control, updated stock inventory and material request file regularly. • Performed unit QHSE audits, held pre-job planning, safety meeting and risk assessments with the personnel and prepared reports based on

IWCF Level 2 Well Control Certification